Note - extra posts ran this week, look backwards if you usually only check on Friday.
We have four 100 foot hoses at our house.
We have three spigots at our house. Each spigot has a Y splitter (photo below) connected to it. One side of each Y splitter has a 100’ hose attached with a sprinkler. I can get anywhere in the yard with one of those sprinkler hoses. The other side of each Y at the spigot is empty to have easy assess to water right at the spigot.
The back spigot has a 25’ hose hooked to the spigot. This 25’ hose, runs to the corner of the house and then has another splitter connected to it. Two 100’ hoses are attached. One has the sprinkler. The other has a light weight 100’ hose (photo below) and wand attached. I use this light weight hose/wand to water all my pots and flower boxes and hanging baskets. I can get to all of them, front and back yard, with this one very light weight hose. It reaches all the way to the end of the driveway and around to the front window box.
The metal splits and extenders (above) that attach to the outside spigots, and all the hoses, need disconnected and cleaned with WD40 before they are stored each winter.
Middle has hose cases -
We simply wind our hoses inside old garbage cans that we already had.
